CONVENTIONAL ACTUATOR The shaft is extended on the actuator in this picture. The two fluid ports are visible on the two black ends of the actuator. CONVENTIONAL ACTUATOR DISASSEMBLED The shaft and boundary face assembly (1) is at the front of the photograph. The black seals (2) around the boundary faceplate that separate the two sides of the actuator are visible. The black end caps (3) and two of the four assembly rods (4) are present. The body of the actuator (5) is the hollow tube where the boundary faceplate slides back and forth. 13.245
RkJQdWJsaXNoZXIy ODY1ODQy