CONTENTS SECTION ONE (CONTROL KNOWLEDGE QUIZ) -Quiz (Answers 10.177 to 10.183) SECTION TWO (CONTROL ACTION & DEVICES) -Component normal positioning and action -Two way valve -Damper motor (actuator) -Pilot positioned (positive positioning relay) on damper motor -Pneumatic and electric devices SECTION THREE (THERMOSTATS) -Non-relay thermostat -Relay thermostat -Change-over calibration board -Calibration procedure -sample of thermostat air use an leak impact on compressor SECTION FOUR (TRANSMITTERS, CONTROLLERS & RECEIVER CONTROLLERS) -Pneumatic transmitters -Pneumatic transmitter compressed air consumption -Controller and receiver controller -Control loops -Control loop components -Controller and receiver controller functions SECTION FIVE (BASIC LOGIC) -Heating/cooling input -Outdoor air relative to coolest demand hotwater reset schedules -Mixed air purposes -Some areas of hidden energy losses in control systems SECTION SIX (SOME CLIENT CALCULATED ENERGY REDUCTION IMPACTS) -Durham Board, Scarborough Board, Etobicoke Board, Wycliffe SECTION SEVEN (SOME TYPICAL FAN SYSTEMS) -100% FRESH AIR (ANSWERS 10.185.) -SINGLE DISCHARGE MIXED AIR (ANSWERS 10.186) -MULTIZONE -DUAL DUCT -VAV PRESSURE INDEPENDENT -VAV PRESSURE DEPENDENT -VAV FAN POWERED BOX -BYPASS (DUMP) BOX -INDUCTION -UNITVENTILATOR WITH FACE & BYPASS -UNITVENTILATOR WITH HEATING VALVE -UNITVENTILATOR WITH FACE & BYPASS (3 PIPE THERMOSTAT) -FAN YSTEM WITH MANY DESIGN ERRORS (ANSWERS 10.184) iv
RkJQdWJsaXNoZXIy ODY1ODQy